SitePlayer Telnet is an RS232 to Ethernet protocol converter. It allows you to connect legacy RS232 devices to the internet by providing a TCP/IP telnet session to an RS232 port. SitePlayer Telnet is configured using a standard web browser. A variety of parameters may be configured for both the serial port and the internet connection. With SitePlayer Telnet you will be able to make an RS232 serial device accessible from anywhere there is an internet connection. You will no longer be restricted by wiring limitations. If you have access to the internet, you will be able to also access SitePlayer. There are many devices which can only be controlled via RS232. With SitePlayer you can now control these device through the internet. You can also use two SitePlayer Telnet devices to create an internet bridge between two serial devices.

Features

Compact Size

RJ45 10BaseT Ethernet interface

Binary data transfer using TCP/IP

Binary data transfer using UDP

Full configurable RS232 DB-9 serial port

Baud rate selection from 50 to 115000 baud

Parity selection Odd, Even or none

Flow control selection RTS/CTS, XON/XOFF or none

Control signals available RTS, CTS, DTR, DSR, DCD and RI

Device configured via a web browser.

- Web browser can be password protected

Flash ROM software updates can be uploaded to device

2 static IP addresses

Downloads
SitePlayer Telenet User's Manual V1.11 (.pdf 3.64 mb)