Atmega8 (Atmel AVR series, 16MHz (16 MIPS)) 8 Kbyte ISP flash, 1K bytes SRAM, 512 bytes EEPROM, three Timers, 8ch ADC, UART, PWM, WDT with Internal RC Oscillator and more.

MR-8 is a 26-pin DIP type small CPU board, which has an ISP(In-System Programming) port, reset button, 16 MHz X-tal, 20 I/O port and two ADC pins. The MR-8 uses an ATmega8(Atmel AVR series) CPU chip as a microcontroller. The ATmega8 has 8K bytes In-System Programmable Flash memory, 1K bytes SRAM, 512 bytes EEPROM and many other peripherals. The user can download a program to the board without a ROM Writer using the ISP function. Free Win-AVR 'C' and demo BASCOM-AVR BASIC compilers are available.

Specifications
Size: 26 x 33 x 19(H) mm
Package: 26 pin DIP (900mil)
CPU: ATmega8-16AI (32 pin TQFP)
CLOCK: 16 MHz (16 MIPS Throughput)
Key: Reset key
LED: ISP Down load indicating LED
PORT: PB0~5, PC0~5, PD0~7, ADC6~7, /RESET, VCC, GND 10 Pin ISP Port
POWER: DC 4.0~6.0V
COMPILER: Free C Compiler(WinAVR)

Features

• Atmega8 (Atmel AVR series, 16MHz (8 MIPS)) 8 Kbyte ISP flash, 1K bytes SRAM, 512 bytes EEPROM, three Timers, 8ch ADC, UART, PWM, WDT with Internal RC Oscillator and more.
• Pre-assembled board
• ISP port
• ISP download indicating LED
• 20 I/O port pins
• Reset button
• Free Win-AVR 'C' and demo BASCOM-AVR BASIC compilers are available.
• ISP downloader (optional)

Downloads
Mr-8 User Manual (.pdf 384 Kb)
How to use WinAVR with Microrobots AVR Products (.pdf 73 kb)
Microrobot AVR GCC User GUIDE (.pdf 1.46 mb)
How To Use Ponyprog with microrobot avr products (.pdf 295 Kb)
ATMEGA8(L) Datasheet SUMMARY [21 pages] (.pdf 176 Kb)
ATMEGA8(L) Datasheet COMPLETE [303 pages] (.pdf 5.41 mb)
MR AVR SOURCE CODE (.zip 5 Kb)
Microrobot AVR GCC Compiler (.zip 16.73 mb)
Ponyprog version 206c (.zip 621 kb)