| Product Image |
Item Name- |
Price |
 |
These new, factory-fresh (not surplus!) motors are comparable in performance and quality to the originals. The only major difference is the lack of a... |
£2.93 Ex VAT £3.44 Inc VAT
Add:
|
 |
1/4" Fuseclip motor mount, great for holding the standard Pager motor |
£0.21 Ex VAT £0.25 Inc VAT
Add:
|
 |
Pager motor technology has made it easier for us to find a suitable replacement for the original TPM for substantially less! Want to build something... |
£3.74 Ex VAT £4.39 Inc VAT
Add:
|
 |
The original VPM was a wonderful motor, so when it went out of production, we just had to find a replacement for it. At 12mm dia x 3.4mm thick... |
£2.98 Ex VAT £3.50 Inc VAT
Add:
|
 |
This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. Offering 7400 rpm @ 4.7V, drawing 150mA... |
£2.00 Ex VAT £2.35 Inc VAT
Add:
|
 |
This high-power motor fits in the GM2/3/8/9 series of gear motors, offering approximately 3 times the speed, twice the torque and quadruple the... |
£1.62 Ex VAT £1.90 Inc VAT
Add:
|
 |
This is the standard motor that is built in to the GM2/3/8/9. It nominally runs at 6VDC and consumes roughly 35mA. If you've blown up your GMx motor,... |
£1.49 Ex VAT £1.75 Inc VAT
Add:
|
 |
This 224:1 gearmotor is very comparable to a hobby servo for power, at a fraction of the cost! This motor offers 50 in.oz of torque, rotating 360... |
£4.03 Ex VAT £4.74 Inc VAT
Add:
|
 |
This model differs from the GM2 in that it has a 90 degree output shaft. This motor offers 50 in.oz of torque, rotating 360 degrees every 1.6 seconds... |
£4.53 Ex VAT £5.32 Inc VAT
Add:
|
 |
These unique gear motors are actually clear-case servos with continuous-rotation ability. No circuit board means you get a cheap, robust,... |
£9.46 Ex VAT £11.12 Inc VAT
Add:
|