The Easy Step™ 1000 (ES1000) is intended to be the link between a microprocessor and stepper motor.

The ES1000 module provides a quick and easy route for driving stepper motors, (without the cost of an 'intelligent' module which usually results in redundancy in the controlling micro).

The small size and high current handling capabilities of the ES1000 modules make them ideal for inclusion in robotics and general control applications.

The ease of use of the ES1000 boards allows their rapid incorporation into any project. Free demonstration software is available making the building and control of a robot simple and quick.

The stepper driver module provides all of the high speed high current switching necessary via MOSFETS. It can control any stepper motor upto 3.0A per phase in any mode supported by your software, such as full, half, wave or micro step modes. All connections to the board are provided by industry standard 0.1 connectors in 3 banks.

Features

• Unipolar motors to 35V, 3.0A
• Suitable for use with full, half step and wave drive modes
• Simple clearly marked connections
• On board clamping diodes
• Size: 43mm X 21mm
• Stepper motors (Optional)
• Connection leads (Optional)

Downloads
Easy-Step 1000 Datasheet (.pdf 309 kb)
BASCOM-AVR Stepper Driver Demo Software (.zip 1 kb)